High-Voltage FPCB Series
Designed for 110V / 220V LED strip applications where cutting unit, resistor configuration, insulation, voltage drop, and production compatibility must be reviewed before sampling.
In this class
AC mains compatible
Model-specific
Copper thickness
Selection guidance
High-voltage FPCB is not always the right starting point. Review these four conditions before requesting samples or committing to a circuit design.
Your market requires 110V / 220V LED strip products
Mains-voltage strip is standard in many markets including North America, Europe, and parts of the Middle East. If your customers expect direct-drive strip without a driver, high-voltage FPCB is the starting point.
You need longer strip runs or larger cutting units
High-voltage designs support longer continuous runs with fewer connection points. Cutting units of 20 cm to 100 cm are common, reducing installation waste for your end customers.
You want to reduce low-voltage power supply limitations
Eliminating the driver reduces BOM cost, installation complexity, and failure points. High-voltage FPCB moves the voltage conversion upstream into the circuit design itself.
You need circuit review before sampling, SMT, extrusion, or encapsulation
High-voltage designs require careful resistor matching, insulation planning, and pad layout verification. A production-fit engineering review before sampling prevents costly rework downstream.
Comparison reference
| Specification | High Voltage | Low Voltage |
|---|---|---|
| Typical voltage | 110V / 220V AC | 12V / 24V DC |
| Common use | Direct mains-drive, no external driver | Driver-fed strip, standard SMT assembly |
| Cutting unit | 20 cm - 100 cm (model-specific) | 2.5 cm - 10 cm typical |
| Main engineering concern | Resistor config, insulation, voltage drop, pad layout | Current capacity, copper thickness, pad pitch |
| Best first step | Engineering review → circuit design → sample | Select standard model → sample → scale |
Not sure which voltage class fits your production target? Ask NWSIRY to review your spec →
Engineering models
1 model available
Model NW2835EB
For high-density 220V strip design.
Send your voltage, LED package, target power, cutting unit, board width, and expected production process. NWSIRY can help narrow down the model before sampling.
Engineering support
Send your LED package, LEDs per meter, board width, cutting unit, copper thickness request, target length, voltage, and market standard. Our engineering team will review the full manufacturing fit.
